MANNOL 9909 1L Anticor Spray UNDERBODY
Professional Anti-Corrosion Underbody Coating

MANNOL 9909 Anticor Underbody 1L

Professional liquid anti-corrosion and anti-gravel coating for vehicle underbodies, wheel arches, body panels and hidden surfaces, designed for spray-gun application.

$47.68
SKU: MP9909
✓Anti-Corrosion Protection
✓Anti-Gravel Coating
✓Spray Gun Application
✓Sound & Vibration Dampening
Fast Shipping Secure Checkout Professional Grade
🛡️

CORROSION & SALT PROTECTION

Helps protect vehicle body surfaces against corrosion, road salt, deicing agents and harsh atmospheric exposure.

🪨

ANTI-GRAVEL PROTECTION

Forms a durable elastic coating that helps protect underbody and body surfaces from gravel, stone impacts and mechanical wear.

💧

WATERPROOF BARRIER

Penetrates cracks and joints, displaces water and forms a protective waterproof layer after drying.

🔇

SOUND & VIBRATION REDUCTION

Provides sound-proofing and anti-vibration properties that help reduce road noise and vibration of body components.

i

Product Information

Anticor is a high – quality anti-corrosion and anti-gravel agent in the form of a liquid based on synthetic resins and rubbers. It is intended for processing of external and internal surfaces of a car body, a bottom, wheel arches, wings, aprons, lower surfaces of thresholds of cars, etc. It is suitable for processing the internal surfaces of the hood, doors, and body amplifiers. For professional body repairs, it is used to protect welds from inside of panels, protect the internal surfaces of new body panels, as well as to process fenders, doors, aprons, hoods, trunks, etc. before installing on the car.

Properties:

• Reliably protects the body from the negative effects of road salt and deicing reagents, all types of atmospheric effects, corrosion, protects from scratches caused by road surface particles (gravel, crushed stone, etc.);
• Has passivation properties, significantly slowing down the corrosion process that has already begun;
• Forms a strong, smooth, indelible elastic film with ticostropic properties (can be applied in a thick layer without forming smudges and self-leveling, and scratches on it are prone to self-tightening), resistant to mechanical influences, to moisture, salts, acids and alkalis after drying. Does not chip or wear during operation;
• Effectively penetrates into the smallest crevices, displacing water from cracks, crevices and joints between the body panels, forms a waterproof layer;
• Has excellent adhesion – holds securely even on smooth, non-porous surfaces. It does not lose its adhesive properties at extremely high temperatures – it does not peel off and is securely held on a heated surface;
• Neutral to metals, plastics, rubbers and paint coatings;
• Resistant to extremely low temperatures, retains plasticity and does not crack;
• It has sound-proof and anti-vibration properties, significantly reducing road noise and vibrations of body elements, thereby increasing the comfort of driving;
• Dry quickly. The declared properties are acquired after complete drying.

Application:

before applying the product, the surface must be thoroughly cleaned of rust, dirt and dust, grease, oil and other organic contaminants. For degreasing, we recommend using 9691 MANNOL Brake Cleaner. For best results, it is recommended to apply the product at room temperature. The product is applied using a spray gun with a compressor at a pressure of 2 to 8 bar (depending on the desired fineness of the spray). Shake the balloon well before use. After pouring the product into the spray container, immediately close the balloon, as a film forms very quickly on the surface of the product. Spray with a layer of up to 1.5 mm at a distance of about 20-30 cm from the surface. Resistance to abrasion and corrosion increases with the thickness of the coating. For this reason, the spray process should be repeated once or twice after a short (1-2 minutes) drying time. To obtain a uniform coating and not to leave untreated areas, the spray must be carried out crosswise. The coating is not subject to further staining.

Depending on the thickness of the layer and weather conditions, the car is ready to move again in about 2 hours. Final drying takes 12-24 hours.
Documents

Technical Downloads

1 file
PDF 9909_TDS.pdf Technical Data Sheet (TDS)
Perfect For
🚗
VEHICLE UNDERBODIES Designed for compatible lower body and underbody surfaces exposed to moisture, salt and road debris.
🛞
WHEEL ARCHES & FENDERS Suitable for compatible wheel arches, wings and fenders requiring anti-gravel and corrosion protection.
🚪
DOORS & BODY PANELS Can be used on compatible internal and external door, hood, trunk and body-panel surfaces.
🔧
PROFESSIONAL BODY REPAIR Suitable for protecting compatible welds, replacement panels and hidden cavities during body repair work.
🛡️
ANTI-CORROSIONHelps slow corrosion and protect exposed body surfaces.
🪨
ANTI-GRAVELForms a durable protective film against road debris and stone impacts.
💨
2–8 BAR APPLICATIONDesigned for spray-gun application using a compressor at 2–8 bar.
⏱️
12–24 HOUR FINAL DRYFinal drying takes approximately 12–24 hours depending on layer thickness and weather conditions.

Professional Underbody Protection Against Corrosion, Salt & Gravel

MANNOL 9909 Anticor Underbody is a professional liquid protective coating for vehicle underbodies, wheel arches and body panels, helping guard against corrosion, moisture, road salt, gravel impacts and vibration while forming a strong flexible barrier.