St0.01. Allround Textile Sealant 500ml

1. thoroughly clean the textile to be sealed with Pol Star or Mehrzweckreiniger and allow to dry completely. The textile must be dry, clean and free of product residues for the next steps.

2. cover surfaces that are not to be sealed with masking tape.

3. apply Allround Textile Sealant evenly to the surface with a microfiber sponge to create a thin and even wet film.

4. work the product thoroughly into the fibers with a suitable sponge in a crosswise motion and then allow to dry completely.

5. An application temperature between 10°C and 40°C is recommended.

6. depending on the textile and ambient temperature, complete drying and development of the effect takes up to 24 hours.

7. only gently clean the sealed surfaces after using Allround Textile Sealant.

Note: If the effect wears off, it can be refreshed by reapplying the product, as long as the textile is not heavily soiled.

Shake before use. Protect from frost and excessive heat. Check for suitability and compatibility before use. Do not apply to surfaces where slipperiness is undesirable Do not apply to displays or polycarbonates.