F6.01. Fine Cut polishing compound 1L

• Cut: 6,0
• Gloss: 7,0
• Ideal for reconditioning medium-weathered paintwork and as a second step after Heavy Cut H9.02/H7.01
• The paintwork on cars, commercial vehicles, motorcycles, etc.

Apply the fine polishing compound to the polishing pad (Fine Cut Pad or lambswool pad) and polish the precleaned surface with max. 2.000 rpm crosswise. The cleaning effect can be varied through pressure, polishing medium and rpm. At the start of the polishing process, we recommend working with more significant pressure at a lower speed. In the further course, reduce the pressure and polish to a high gloss at a higher speed. The remaining polish residues can be removed easily with our Profi ultrasonic cut microfibre cloth. Remove any streaks or traces of polish with Micro Cut M3.02.

Shake before using. Before using, check suitability and compatibility. Do not use it on hot surfaces. Protect against frost and excessive heat.

This product information can advise you only without obligation. Liability on our part can not be derived. Please, check whether the product is suitable for your application. We will be pleased to assist you.

MSDS DOWNLOAD